HP StorageWorks ESL9000 Series Manual page 36

Tape library unpacking and relocating guide
Table of Contents

Advertisement

Unpacking and Moving the Library
15. Remove the right wooden bar and then slide the two ramp extensions and the foam
block out from under the right side of the library (see Figure 4-8). Set the ramp
extensions aside until you are ready to move the library.
Figure 4–8: Removing the ramp extensions
16. Reinsert the right wooden bar into its brackets on the pallet to hold the library in
place.
WARNING: Do not move the pallet with the library unrestricted. If the pallet must
be moved, reinstall the metal stop blocks.
4–10
SHR-1905
ESL9000 Series Tape Library Unpacking and Relocating Guide

Advertisement

Table of Contents
loading

Table of Contents