D-Link DNH-100 User Manual page 72

Nuclias Connect Software User Manual
After the scanning the network range, the Step 3 page will list any detected access points.
Tap the radio button next to the DAP to select it. The local provision file that you previously selected will be pushed to the
selected DAP.
Tap Push Provision File to continue.
The DAP login pop-up window displays. The listed IP and MAC address are shown at the top of the window. Confirm the
selection and enter the user name and password with authorization to access the selected DAP.
Tap Apply to continue the login process. The Modify IP Information page will appear. Any listed information can be modified;
see the following figure for further information.
Nuclias Connect App
Parameter Description
Cancel
Tap to discard any changes and continue
the process.
Done Tap to accept any changes and continue
the process.
Model Name
Displays the model name for the listed
DAP device.
MAC
Displays the MAC address of the listed
DAP device.
Page 72
Appendix