Hardware Overview; Led Indicators; Interface Connectors - D-Link DNH-100 User Manual

Nuclias Connect Software User Manual

LED Indicators

#
1
2
(10/100 Mbps)
3
(1000 Mbps)

Hardware Overview

LED Indicators
1
LED
Solid Green - The device is powered on and ready for use,
and it is in standalone mode.
Power
Blinking Green - The device is booting up.
Solid Red - Device is unable to boot .
Solid Green - Port is operating at 10/100 Mbps
Link Speed
Light Off - No Link.
Solid Green - Port is operating at 1000 Mbps
Link Speed
Light Off - No Link.

Interface Connectors

1 2
# Connector Description
Used for rebooting or resetting the device back to
1 Reset
factory default settings.
Console RJ-45 port to connect the RJ-45 console cable for CLI
2
Port management .
Ethernet
3 Gigabit RJ-45 port for LAN connection.
Port
MicroSD
4 MicroSD slot for MicroSD card
Slot
USB 3.0 Type A port
5 USB Port
optional HDD connection).
Due to EU regulations the 16 GB MicroSD card is only included in the WW version.
1
3 Do not remove the microSD card while the power is on as this may damage your card.
Interface Connectors
2 3
Description
3 4
up to 32 GB.
1,2,3
(provides 5V/1A power for
2
2 Only FAT32 format is supported.
Page 4
Hardware Overview
5