D-Link DNH-100 User Manual page 30

Nuclias Connect Software User Manual
Nuclias Configuration Profile Settings Bandwidth Optimization
The Bandwidth Optimization page displays the configurable settings to optimize available bandwidth. Navigate to Configuration
> Profile Settings > [Site] > [Network] > Bandwidth Optimization to view existing settings.
Block
Enable Bandwidth
Optimization
Downlink
Bandwidth
Uplink Bandwidth Enter the total uplink bandwidth speed for the access points in the network.
Rule Type
Band
SSID Index
Downlink Speed
Uplink Speed
Add
Clear
Click Save to save the values and update the screen.
Once the settings are updated, the configuration must be uploaded to the access points. See "Profile Settings" on page 22 for
further information.
Description
Click the drop-down menu to enable or disable the bandwidth optimization function.
Enter the total downlink bandwidth speed for the access points in the network.
Click the drop-down menu to select the rule type.
• Allocate an average BW for each station: Optimize bandwidth by averaging the
allocated bandwidth for each client.
• Allocate a maximum BW for each station: Specify the maximum bandwidth for each
connected client, while reserving available bandwidth for additional clients.
• Allocate a different BW for 11a/b/g/n station: The weight of 802.11b/g/n and
802.11a/n clients are 10%/20%/70% and 20%/80%. The AP will distribute different
bandwidth for 802.11a/b/g/n clients.
• Allocate a specific BW for SSID: All clients share the assigned bandwidth.
Click the drop-down menu to select the wireless frequency band used in the rule.
Click the drop-down menu to select the SSID used in the rule.
Enter the downlink speed assigned to either each station or the specified SSID.
Enter the uplink speed assigned to either each station or the specified SSID.
Click Add to add the rule into the Bandwidth Optimization
Rules.
Click Clear to clear the entered rule.
Page 30
Nuclias Connect Configuration