D-Link DNH-100 User Manual page 23

Nuclias Connect Software User Manual
Nuclias
The SSID page displays the configurable parameters of a network's wireless settings. Navigate to Configuration > Profile
Settings > [Site] > [Network] > SSID to view existing settings.
In the Security section, the following parameters can be configured:
Block
Band
Index
SSID
Character Set
SSID Broadcast
WMM (Wi-Fi
Multimedia)
Security
Fast Roaming
Encryption
Key Size
Key Type
Key Index
Key Value
Encryption Type
Group Key Update
Interval
Passphrase
RADIUS Server
Once the settings are updated, the configuration must be uploaded to the access points. See "Profile Settings" on page 22 for
further information.
Configuration
Description
Click the drop-down menu to select wireless frequency band.
Click the drop-down menu to select SSID index (Parameters: Primary,
SSID 1 to SSID 7). To create a new SSID, select the index parameter
first.
Enter the wireless network name. The SSID must be the same across
all frequencies. In addition, make sure the network name (SSID) on
the selected access point is the same as the defined network name
(SSID) on the Nuclias Connect. For further information, see the access
point Basic > Wireless settings and Advanced Settings > DHCP Server
> Dynamic Pool Settings, to ensure the Domain Name field reflects
the defined network name (SSID) on the Nuclias Connect.
Click the drop-down menu to select the character set to be used in
the SSID encoding: UTF-8 or GB2312.
Click the drop-down menu to enable or disable the wireless SSID
visibility.
Click the drop-down menu to enable or disable the Wi-Fi multimedia.
Click the drop-down menu to select the wireless security protocol:
Open System (no pre-shared key required), WPA-Personal, WPA
Enterprise (Radius server required), WPA2-Personal, WPA2-Enterprise
(Radius server required), WPA-Auto-Personal, WPA-Auto-Enterprise
(Radius server required).
Click the drop-down menu to enable or disable fast roaming. This
function is only available for compatible models and specific
software version.
Click the drop-down menu to enable or disable WEP Open System
encryption. The function is only available when Security is set as
Open System.
Click the drop-down menu to select the WEP key size.
Click the drop-down menu to select the WEP key type.
Click the drop-down menu to select the WEP key index.
Enter the open system WEP encryption key.
Click the drop-down menu to select the encryption type: Auto, AES,
or TKIP.
Enter the WPA group key update interval value.
Enter the secret pass phrase used. The function is only available
when Security is WPA-Personal, WPA2-Personal or WPA-Auto-
Personal.
Enter the RADIUS server's IP address. The function is only available
when Security is WPA-Enterprise, WPA2-Enterprise or WPA-Auto-
Enterprise.
Profile Settings
Page 23
Nuclias Connect Configuration
SSID