D-Link DNH-100 User Manual page 65

Nuclias Connect Software User Manual
The Nuclias Connect Portal provides you with a easy way to view and connect to all your Nuclias Connect hubs.
Requirements for use include:
• A Nuclias account
• DNH-100 device(s) with single-sign-on enabled
The portal can be found at:
The Portal provides the following information:
Parameter
Number
Status
Name
Host
Sites
Networks
Devices
Clients
Version
Actions
https://connect.nuclias.com/
Description
Number of the DNH-100 on the list.
Displays whether or not the Nuclias Connect portal can link
to that DNH-100.
Name of the Nuclias Connect Hub. You can change this
name by clicking on it then typing on the available text box.
Displays both the device IP address and its public IP address.
Number of sites managed by that DNH-100.
Number of networks managed by that DNH-100.
Number of devices managed by that DNH-100.
Number of clients connected to devices managed by that
DNH-100.
Firmware version number of that DNH-100.
Click Launch to open the DNH-100 Nuclias Connect
interface. Please note that IP mapping is required for
instances behind a firewall or router. Click Forget to unlink
this DNH-100 from the Nuclias Connect portal. (Forget is
only available when that device is offline.)
Page 65
Nuclias Connect Configuration