Monitor; Access Point - D-Link DNH-100 User Manual

Nuclias Connect Software User Manual
Nuclias
After clicking on Monitor -- > Access Points in the menu, the Usage and Total Access Points frames will appear. On this frame,
you can view a report of all or a selected number wireless clients and networks managed by the application.
Three reports can be generated using Site, Network, or Local IP address.
The following figure represents a typical report. This report can be refined by selecting the a specific Site from the first drop-
down menu, and then selecting the network in the second drop-down menu.
In the Search By drop-down field, select an attribute (Local IP Address, Local IPv6 Address, NAT IP Address, MAC Address,
Model Type, or FW Version) to specify the search function or enter a keyword related to the target device in the Search field.
Click to start the process. Any relevant devices meeting the search criteria will be listed in the frame.

Monitor

Block Description
Usage
Displays a report listing the RX (kB) /
TX (kB) usage for the specified site and
network.
Total X Access
Displays a report listing all detected
Points
wireless clients.
Page 13
Nuclias Connect Configuration

Access Point