Clarity Power Technology; Boost Clarity Power On/Off; Volume Control; Handset Ringer - Clarity 420 User Manual

900 mhz cordless telephone with caller id
Hide thumbs Also See for 420:
Table of Contents

Advertisement

Available languages

Available languages

7. Press UP (
) or DOWN (
the hour digits.
8. Press CALL once to select. After the hour
digits are set, the minute digits flash.
9. Press UP (
) or DOWN (
the minute digits.
10. Press CALL once to select. After the
minute digits are set, AM/PM will flash.
11. Press UP (
) or DOWN (
AM or PM.
12. Press CALL once to select. After AM or
PM is selected, the time/date digits
will be blank.
13. Press CALL once to display the time/date
again or press UP (
go to the next menu.
Setting Contrast
Default: Level 2
1. Press CALL once to enter the Contrast
Level selection mode. The current
selected level flashes.
2. Press UP (
) or DOWN (
change the level.
3. Press CALL to select level desired.
4. Press UP (
) or DOWN (
advance to the next menu.
Feature Set-up
) to change
) to change
) to for either
) or DOWN (
) to
) to
) to

Clarity Power Technology

With the Clarity Power feature, the high fre-
quency sounds are amplified more than the
low frequency sounds so words are not just
louder, but clearer and easier to understand.

BOOST Clarity Power On/Off

The C420 has a BOOST CLARITY POWER
button that controls the loudness of the
receiver. Once the BOOST button is pressed,
an extra level of amplification is added over
the entire range of the volume control.
The TALK button will light ORANGE to indi-
cate the CLARITY POWER feature is activated.
WARNING: When the TALK button is lit
ORANGE volume may be at a high level. To
protect hearing, lower the volume control to
minimum before using.

Volume Control

The dial controls the level of volume the hand-
set and headset receive. The volume dial
provides up to 15 dB of volume before the
CLARITY POWER button is activated. Once
the CLARITY POWER button is pressed, the
Clarity 420 will provide up to 30 dB of gain.

Handset Ringer

Set the switch marked Ringer On/Off located
on the side of the handset. The ringer switch
must be set to ON for the handset to ring.
E
N
G
L
I
S
H
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clarity

Table of Contents