Technical Specifications - Graco LDP5 Instructions Manual

Technical Specifications

Technical Specifications
LDP5 (Preset) Electronic Metered Dispense Valves
Flow range*
Maximum Working Pressure
Operating temperature range
Storage temperature range
Inlet/Outlet Sizes
Inlet size
Outlet size
Fluid Compatibility
Dimensions without extension/nozzle
Length
Width
Height
Wetted parts
Battery**
Pressure loss at 5 gpm†
Accuracy
Units of Measurement (pints, quarts, gallons, liters (factory set to quarts)
Maximum totalizer amount
Maximum recorded dispensed volume
Maximum preset volume
Weight
All models
Notes
*Tested in No. 10W motor oil. Flow rates vary with fluid pressure, temperature, and viscosity.
**Battery required to meet safety approvals: Duracel
†At 2.5 gpm (9.5 lpm), at 70°F (21°C), with 10W motor oil and 1 gal. (3.8 l) dispensed. May require
calibration; out of box accuracy is +/- 1.25 percent.
®
Duracel is a registered trademark of Duracell Inc.
All other brand names or marks are used for identification purposes are trademarks of their respective
owners.
28
US
0.1 to 5 gpm
1000 psi
55°F to 120°F
-30°F to 120°F
1/2 npt, 1/2 bspp, 1/2 bspt
3/8 npt
lubricating oils, antifreeze mixtures
11 in.
3.25 in.
3.25 in.
Stainless steel, nitrile rubber, zinc, CS, LCP
9 volt alkaline
90 psi
+/- 0.5 percent
99,999 units
999.99 units
999.9 units
3 lb.
®
MN1604
Metric
0.4 to 19 lpm
6.89 MPa, 68.9 bar
12.8°C to 49°C
-34°C to 49°C
28 cm
8.3 cm
8.3 cm
0.62 MPa, 6.2 bar
1.36 kg
312668ZAC