Table of Contents
Advertisement
Technical Specifications
Technical Specifications
DIRECT MOUNT VENT VALVE FOR G3 PUMPS
Maximum working pressure
Pressure Relief Valve
Factory Set Pressure
Reset Pressure
Relief Rate
Solenoid Valve
Flow
Materials of Construction
Wetted materials on all models
Weight
Solenoid Coil
115 AC*
* AC service coils are internally rectified and can be used in 50 or 60 Cycle (Hz) lines.
NOTE: AC voltage service with transient surges over 1000 volts may require a varistor to be placed in parallel with
the coil.
NOTE: Normally open versions of the vent valve are not recommended for use with oil.
8
US
700 psi
200 psi
adjustable to 750 psi + 10 percent
80 percent of pressure
0.13 gallons/sec @3000 psi
Up to 5 gpm
zinc plated steel, carbon steel, 6061 T6 aluminum, fluoroelastomer,
polyurethane
37.72 oz.
Resistance (DC) @ 68°F (20°C)
(Ohms)
568
Metric
4.8 MPa, 48.3 bar
1.37 MPa, 13.7 bar
5.17 MPa, 51.7 bar + 10 percent
0.57 liters/sec @21 MPa. 207 bar
18.9 lpm
1069.5 grams
Initial Current Draw (Amps)
0.17
3A9475A
Advertisement
Table of Contents
