Clarity Cordless Telephone User Manual page 26

Temporary Tone
If you have rotary (pulse) dial service, you can
change from pulse to touch tone (tone) during a call.
1. Make phone call and wait until it is connected.
2. Press the * key. Keys pressed after this are sent as
tone signals.
3. The phone will automatically reset to rotary (pulse)
service after the call ends.
Lighted Key Pad
The key pad will light for fifteen (15) seconds after
removing the handset from the base. To reactivate the
feature while in standby, press the TALK or the MEM
button. To activate while the phone is in use, press
any key.
Page/Handset Locator
To send a page signal from the base to the handset,
press the PAGE button located on the base of the
telephone. A series of rings will sound from the
handset.
To locate the handset if it is away from the base,
press and hold the PAGE button for approximately
five (5) seconds. A series of rings will sound. Return
the handset to the base or press any button to cancel
the page.
26