Kohler K-77798T-0 Homeowner's Manual page 9

L - Seat ...auto deodorizer setting
Long press this button to start auto deodorizer setting mode, seat icon blinks slowly. Press seat icon again to
change setting per activation or deactivation circulation.
1. When position indicating LED lights up, indicates auto deodorizer function starts. Toilet generates one short beep.
2. When position indicating LED lights OFF, indicates auto deodorizer function stops. Toilet generates one long beep.
M - Intelligent sterilization...Auto UV sterilization setting
Long press this button to start auto UV sterilization function setting mode, intelligent sterilization icon blinks
slowly. Press intelligent sterilization icon to change setting per activation or deactivation circulation.
1. When water temp indicating LED lights up, indicates auto UV sterilization function starts. Toilet generates one short beep.
2. When water temp indicating LED lights OFF, indicates auto UV sterilization function stops. Toilet generates one long beep.
D - Massage...prolonged seating indication setting
Press and hold this button to enter prolonged seating indication setting, massage icon starts blinking slowly.
Press massage icon for different setting per activate or deactivate circulation.
1. When massage indicating LED lights up, indicates prolonged seating indication function starts. Toilet generates one short beep.
2. When massage indicating LED lights OFF, indicates prolonged seating indication function stops. Toilet generates one long beep.
E - Position ...wand clean position setting
Long press this button to start wand clean position setting when unseated, position icon blinks slowly. Press
position icon again to change per extension and retraction circulation.
1. When position icon indicating LED lights up, indicates wand extended.
2. When position icon indicating LED light OFF, indicates wand retracted.
The function is used for nozzle manual clean. Press STOP button or long press wand move button to stop this function.
G - Ring temp ... energy saving setting
Long press this button to start energy saving setting, seat temp icon blinks slowly. Press seat temp icon again
to change per starts and stops circulation.
1. When Seat Temp indicating LED lights up, indicates energy saving function starts. Toilet generates one short beep.
2. When seat temp indicating LED lights OFF, indicates energy saving function stops. Toilet generates one long beep.
Note: long press function button to setup functions, the toilet will exit function setting when customer does not
have any action or press any key within 10s.
Remote controller battery usage and replacement
Remote docking station uses four AA alkaline batteries.
When battery is low, remote red LED blinks and lights up, indicates the replacement of battery.
Note:
1. The +/- polarities of battery must be consistent with the
mark of remote controller.
2. Do not mix new and old batteries.
3. Please use alkaline battery.
Others
Prevent liquid from spraying the remote or do not soak remote into the liquid.
Do not place remote around the small household appliances, such as hand dryer or hair dryer etc.
to prevent remote from interference.
Do not apply frequent and violent external force on remote buttons.
Place remote back to docking station on the wall after usage.
Prevent remote from dropping in the process of use.
Anti-theft function: secure remote with base by screws, specific method refers to installation guide.
Kohler Co.
Place 4 AA alkaline batteries in per "+/-"indication as shown
9
Red LED blinks
Press this cover and
slide down to open
4 AA alkaline batteries
battery box
1357243-T01-H