Table of Contents
Advertisement
Shockmount
s
MAINTENANCE SCHEDULE
ENGINE MAINTENANCE
Refer to the engine owner's manual for maintenance intervals and procedures.
ENGINE SPEED
The idle speed of the engine should not exceed the following:
Honda - 3500 rpm
Robin - 2000 rpm
If the idle speed is greater the clutch may not disengage. Check engine owner's
manual for procedure on setting idle speed.
CLEANING
Clean any concrete from the Screed immediately after each use. DO NOT allow
concrete to harden on the screed.
1. Use a hose to remove any excess concrete.
2. Remove any buildup with hard plastic bristle brush.
NOTE: DO NOT use a wire brush, hammer, or pressure washer to remove concrete
from the main unit or float blade.
3. Remove the blade.
4. Start engine and run the exciter for about 10 seconds.
5. Shut down the engine.
Tel:(+86)17737606271
needed
Check for cracks
or tears
Henan Master Machinery Co., Ltd
www.mastermachinerys.com
×
9
×
Advertisement
Table of Contents
