Connecting The Equipment; Quality Control; Maintenance; Cleaning The Holzmann Aspirator - Master MS Seeds Instructions For Use And Maintenance Manual

Connecting the equipment

+ Connect the machine to a single-phase 230 V 50/60 Hz power supply.
Connect the Holzmann aspirator to a single phase 230 V 50/60 Hz power supply.
+
+ Press the ON switches of the MS Seeds machine and the Holzmann aspirator.

Quality control

Check the various trays. If the seeds are not clean enough, this could be due to several factors:
+ Flower loading speed
+ Ventilation power
stems.

Maintenance

IMPORTANT: The maintenance work will always be done with the machine stopped and with the electrical connector
disconnected.
Always wear protective gloves for maintenance operations.

Cleaning the Holzmann aspirator

Press the OFF button on the aspirator and the MS Seeds machines.
1
Disconnect the MS Seeds and the Holzmann aspirator from the power sources.
2
Remove debris from the Holzmann aspirator.
3
Clean the bag with hot water. It is essential to keep the vacuum cleaner clean to avoid obstructions.
4
1
2

Cleaning the sheller

Press the OFF button on the Holzmann aspirator
1
(B) and of the MS Seeds (A) machines and discon-
nect them from the power supply.
2
X
Empty the cyclone tank (C). IMPORTANT: this
must be emptied regularly.
-
19