Your Receiver; Default Pin: 0000; Front Panel; Rear Panel - Strong SRT 3030 User Manual

2.0 YOUR RECEIVER

2.1 DEFAULT PIN: 0000

2.2 Front Panel

1
1. Power button:
2. CH-/CH+:
3. Standby indicator:
4. LED display:
5. Remote control sensor(hidden):
6. USB A port

2.3 Rear Panel

Digital HD cable receiver SRT 3030
Supplied by STRONG Austria
CABLE IN
1
1. CABLE IN
2. HDMI
3. TV SCART
4. Power input
6
2 3
Switch the receiver to Standby or On.
To change channels without using the remote control
Shows power state of the receiver: Red LED - receiver is in standby mode.
Orange signal LED – receiver is locked to signal.
Shows channel number in operation and time in Standby
Receives the signal from the remote control
For Media playback, record and timeshift.
HDMI
2
To connect a cable from the wall outlet of your cable signal provider.
To connect to the HDMI input of your TV using a good quality HDMI cable.
To connect to TV using a SCART cable.
Connect the supplied Power Supply unit to the input.
4
TV SCART
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY, DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES.
3
Fig. 1
USB: 5 V
500 mA max.
5
Fig. 2
12 V , 1A, max 12W
4