Table of Contents
Advertisement
Audio Description
AD Volume Offset
7.6 System menu
The System menu provides the possibility to make changes in the overall technical set-up of the receiver.
System Information
Parental Guidance
Lock Control
Menu Lock
Channel Lock
Change Password
Factory Reset
WARNING
A factory reset will permanently delete all your personal settings, timers and stored channels.
Please consider this before you perform a factory reset.
WARNING
NEVER power off the receiver or remove the USB device during the Factory Reset process.
Doing so might cause irreparable damage to your receiver and will void your warranty.
Audio Description can be offered by a broadcaster as a service to Visual
Impaired people. The video content will be described by a narrator.
When set to {On}, if the AD track is available, will be mixed automatically
with the original sound.
The volume of the AD track can be adapted to make a better mix with
the original sound.
This submenu shows receiver specific information such as hardware
and software version. Please have the System Information screen on
hand when you call our hotline. The person who answers your call
might ask for the information given in this screen.
Programmes with a Parental Guidance Rating can be blocked from
viewing and opened only with a Password. To setup this feature, enter
your password first. Then select an age, above which the channel must
be protected. Options are: Off, Age 7 to 18. Default is Age 18. Default
password is 0000.
To enter this sub menu item you must always enter the (default 0000)
active password. The Lock Control has to be set before it is possible
to block access to other menu items and certain channels. It is also
possible to change the default password in to a more secure one.
Set to On to if you want to prevent entering to menu items which could
substantially change the setup of the unit, for example the Search or
Program menu.
Select {On} to activate the lock set on channels in the Channel Edit
menu. All locked channels will need to have the password entered.
Select Off to override the lock set on channels in the Channel Edit
menu. All locked channels will freely be accessible.
Press OK to enter the sub menu. To change the password: Select Old
Password and enter either the default password, or the previously
changed password. At New Password enter a new thought up
password. Re-enter the same new password at Confirm Password. A pop
up window will show if change is successfully set or if the 2nd entry was
invalid, then try again.
If the unit should suddenly behave irregular, after for example a
software update or mains power failure, you can try to solve the
problem with a factory reset. Also, if you have made changes in the
settings, and you have forgotten exactly which setting was changed,
you can restore to factory defaults and start from there. To use this
option you must always enter the active password. (default 0000). At
the confirmation popup press OK, the receiver will reboot and start
with the Installation Guide menu.
19
Advertisement
Table of Contents
