Table of Contents
Advertisement
3.4 Connecting a USB storage device
Digital Audio
Ampli er
Digital HD cable receiver SRT 3030
Supplied by STRONG Austria
CABLE IN
NOTE
Timeshift/recording and playback only works properly when a fast USB storage device
such as a USB2.0 HDD is connected to the receiver. Timeshift/recording and playback of HD
content requires a sufficient read/write speed of the used USB storage device. Pen drives may
prove to have too slow (buffering) speeds to correctly record and playback HD programs.*
Plug the device into the front panel USB A connector. A connect icon will show shortly after
the device is read and ready to go.
*This user manual describes the full functionality including the recording and timeshift function and all may not be applicable if the software
for recording/timeshift via USB has not yet been installed.
4.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV and make sure the receiver is connected to the main
power. If you are using the receiver for the first time or restored to factory default, the Installation guide will appear on
your TV screen. Uset uto select the OSD Language of your preference. Set the other options as are appropriate for your
situation. Country will follow OSD Language but can be changed in the main menu. FTA Only FTA means only Free-to-Air
channels will be stored after a search has been done. All would store all channels. This receiver can only decode FTA
channels. Selecting Channel Search and press OK will start off the search for programs. After the automatic search is
finished the receiver will show the first channel in the list.
NOTE
Installers or advanced users may press MENU while in the {Installation guide} and perform
(search) options from the main menu immediately.
Television
2 HDMI
Cables
HDMI
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES.
DOLBY, DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES.
TV SCART
12 V
Fig. 7
, 1A, max 12W
Fig. 8
11
Advertisement
Table of Contents
