Service Menu Screen - Panasonic AJ-D610WBP Service Manual

9-1. Service Menu Screen.

[ SERVICE ADJ 1/2 MENU SCREEN ]
This menu is use for setting.
ITEM
GAMMA (SERV)
R GAMMA (SERV)
B GAMMA (SERV)
TEST PULSE
ECU CONNECT
CONCEAL
INNER ECC
OUTER ECC
IF ADJ
SERVO MODE
< SERVICE ADJ 1/2 >
GAMMA(SERV)
R GAMMA(SERV)
B GAMMA(SERV)
TEST PULSE
ECU CONNECT
CONCEAL
INNER ECC
OUTER ECC
IF ADJ
SERVO MODE
RANGE
ON/OFF ON
-10 - +10 +00
-10 - +10 +00
ON/OFF OFF
ECU/EVR ECU
ON/OFF ON
ON/OFF ON
ON/OFF ON
ON/OFF OFF
ATF/CTL ATF
INF-14
: ON
: +00
: +00
: OFF
: ECU
: ON
: ON
: ON
: OFF
: ATF
PRESET
This selects ON or OFF for the GAMMA
correction.
Adjustment of Rch GAMMA for service.
Adjustment of Bch GAMMA for service.
TEST PULSE becomes available.
Select the using of the ECU connector
ECU : Connect with ECU
EVR : Connect with EVR tool.
Turn ON when adjusting Video I/F board.
Selection of SERVO MODE.
ATF : Capstan servo is controlled by ATF
CTL : Capstan servo is controlled by CTL
REMARKS