Table of Contents
Advertisement
Turning on the Monitor/Switching Input
Settings
1
Connect the plug of the AC power cord to an
AC outlet.
2
Press the (On)/
(On) side to turn on the monitor.
The power indicator on the front panel lights
in green.
3
Switch the input settings.
If the desired image is not displayed, press
the CONTROL button to show the operation
buttons on the front panel, then press
PORT A or
PORT B.
For details on switching the input settings, refer
to "Location and Function of Parts and Controls"
on page 17 or "Input/Output Configuration
menu" on page 31.
(Standby) switch to the
Initial Setting
When you turn on the unit for the first time after
purchasing it, select the area and language
where you intend to use this unit.
To set the using area
1
Turn on the unit.
The Area Setting screen appears.
2
Press the CONTROL button.
3
Press the or button to select the area
where you intend to use the unit and press
the button.
4
When the confirmation screen is displayed,
press the or button to select Yes and
press the CONTROL button.
The Area Setting screen disappears and the
Language Setting screen appears.
The following item in the menu is
automatically applied to the value
corresponding to the selected area.
Area
North America
Latin America - Argentina
Latin America - Paraguay
Latin America - Uruguay
Latin America - Other
Africa, Australasia
Europe, Middle-East
Asia Except Japan - NTSC
Asia Except Japan - PAL
Japan
25
Color Temperature
D65
D93
Advertisement
Table of Contents
