Table of Contents
Advertisement
Dimensions
Front
When an optional stand SU-600MD is attached
Rear
* Length of M4 screws (4)
9
7 (
/
32
Monitor cabinet
Unit: mm (inches)
Unit: mm (inches)
13
) to 10 (
/
)
32
M4 screw
Attached object
Unit: mm (inches)
Warning
Be sure to set the tightening torque value to
the following value.
Torque value: 1.2±0.1 N·m
Make sure the tightening torque value is at this
value. If the torque value is not appropriate, the
mounting part may become damaged or the
screws may become loosened, and in the worst
case, it may cause injury or damage to the unit
due to the unit falling.
The supplied screws are accommodated
mounts with a thickness of 2 to 5 mm (
7
/
inches). When securing them to other
32
objects, refer to the figure shown above and
use the screws recommended for the attached
object.
When mounting the unit to objects such as
movable mounting arms, if excessive force is
applied, the mounting part may become
damaged, and in the worst case, it may cause
injury or damage to the unit due to the unit
falling. To use the monitor with the movable
mounting arm, hold the handle of the
mounting arm to move the monitor and avoid
applying excessive force to the mounting part.
Side
When an optional stand SU-600MD is attached
Mass:
Approx. 10.5 kg (23 lb 2.38 oz) (when the
optional stand is not installed)
42
3
/
to
32
Unit: mm (inches)
Advertisement
Table of Contents
