Switching The Input - Sony SDM-U27M90 Help Manual

Help Guide
LCD Monitor
SDM-U27M90

Switching the input

This monitor automatically selects the input to which the signal is being input.
If there are multiple input signals, the inputs are selected in the following order of priority.
HDMI 1→HDMI 2→DisplayPort→USB-C
To switch the input manually, use the joystick.
Press the joystick on the rear of the monitor.
1
The menu is displayed.
Move the joystick to the left.
2
The input selection menu is displayed.
Select the desired input.
3
Press the joystick.
4
The input switches to the one selected.
Note
When [Auto select] is set to [Off], the input is not selected automatically.
When [Control for HDMI] is set to [On], the input of that device is automatically selected when turned on or operated.
If there is no input signal, the input is not selected.
Related Topic
[Input]
G-462-100-11(1) Copyright 2022 Sony Corporation
17