INSPECTION AND MAINTENANCE
(2)
2) To remove and install the bulb of the
license plate light (2), simply pull out or
push in the bulb.
7-87
Rear fog light (if equipped)
LED is used. It is recommended that you
take your vehicle to a SUZUKI dealer for
light replacement since special procedures
are required.
Interior light
Remove the lens by using a flat-bladed
screwdriver covered with a soft cloth as
shown. To install it, simply push it back in.
Front (without overhead console)
61MM0B087
Front (with overhead console)
Center (without sunroof)
61MM0A207
61MM0A129
60G115