Suzuki VITARA Series Manual page 206

Selection of ignition modes
Press the engine switch to select "ACC" or
"ON" mode as follows when you use an
electric accessory or check the operation
of instruments without running the engine
or operating the strong hybrid system.
1) Bring the keyless push start system
remote controller with you and sit in the
driver's seat.
2) Manual transaxle – Without depressing
the clutch pedal, press the engine
switch (1).
Automatic transaxle or Auto Gear Shift
– Without depressing the brake pedal,
press the engine switch (1).
(1)
Every time you press the engine switch,
the ignition mode changes as follows.
Automatic transaxle or Auto Gear Shift
Gearshift
lever in
LOCK ACC
(Audio equipment)
(OFF)
Manual transaxle
(Audio equipment)
(OFF)
82K254
NOTE:
• Automatic transaxle or Auto Gear Shift –
P
• When selecting the ignition modes, the
ON
If the master warning indicator light
Gearshift lever in a
P
blinks and the ignition modes cannot
position other than
be selected
Your keyless push start system remote con-
troller may not be sensed as being within the
57L31006
interior workable area (refer to the related
explanation in this section). Try again after
checking that you have the remote controller
with you. If the ignition modes still cannot be
selected, the battery of the remote controller
may be discharged. To select an ignition
mode, you must then use the following
method:
68PH00322
OPERATING YOUR VEHICLE
If the gearshift lever is in any position
other than "P", or if the knob button is
pushed when the gearshift lever is in "P"
position the ignition mode cannot be
returned to "LOCK" (OFF).
information display in the instrument
cluster shows certain messages. Refer
to "Information display" in "BEFORE
DRIVING" section for details.
3-8