Suzuki VITARA Series Manual page 170

Dual sensor brake support indica-
tor light (if equipped)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to "ON", this light
comes on briefly so you can check that the
light is working.
When the automatic brake system is acti-
vated, this light blinks rapidly.
In the following situations, this light will come
on and the dual sensor brake support sys-
tem will stop functioning when the ignition
switch is in "ON" position or the ignition
mode is "ON".
When the dual sensor has failure, the func-
tion of the dual sensor stops until the igni-
tion switch is turned to "LOCK" position or
the engine switch is pressed to change the
ignition mode to "LOCK"(OFF). Find a safe
place to park and turn the ignition switch to
"LOCK" position or change the ignition
mode to LOCK (OFF). Restart the engine,
or the strong hybrid system and check that
the dual sensor brake support indicator
light and lane departure warning indicator
light go off.
• If both of the indicators stay on after
restarting the engine or the strong hybrid
system, there may be a failure of the
dual sensor. Ask a SUZUKI dealer to
have the dual sensor inspected.
Under the following situations, the function
of the dual sensor stops temporarily. When
the situations are improved, the temporary
stop of the function will be cancelled.
54P000255
• When the visibility of the dual sensor is
poor.
• When the temperature of the body of
dual sensor is high.
• When the systems related to the dual
sensor brake support stop temporarily.
• When the battery has a voltage abnor-
mality.
For details, refer to "Dual sensor brake
support system (if equipped)" in "OPERAT-
ING YOUR VEHICLE" section.
BEFORE DRIVING
Dual sensor brake support OFF
indicator light (if equipped)
When the ignition switch is turned to "ON"
position or the engine switch is pressed to
change the ignition mode to "ON", this light
comes on briefly so you can check that the
light is working.
In the following situations, this light will come
on and the dual sensor brake support sys-
tem will stop functioning when the ignition
switch is in "ON" position or the ignition
mode is "ON".
• When the dual sensor brake support OFF
switch is pushed and held to turn off the
dual sensor brake support system.
®
• When the ESP OFF switch is pushed to
®
turn off the ESP systems (other than
®
ABS), the ESP OFF indicator light will
also come on.
For details, refer to "Dual sensor brake sup-
port system (if equipped)" in "OPERATING
YOUR VEHICLE" section.
54P000254
2-144