Using The Ac Adapter - SATO MB200 Operator's Manual

Using the AC Adapter

Plug the specified AC Adapter (optional) into the printer.
4
(1) Take off the DC input jack cap, and plug the AC adapter into
the DC input jack.
(2) Plug the AC adapter into the
outlet.
* Always turn off the printer when unplugging the AC adapter
or DC output jack, or when cutting off the power source.
When turning off the printer, the status indicator lights up in
green. Do not cut off the power source while the light is on.
Always make sure the green light is off when cutting off the
power source.
* When the power source is cut off while the green light is on,
the data in the printer memory may not be refreshed.
22