Daikin FTKM33NV2S Service Manual page 9

Si041352EB
Step
4 Pull out the indoor heat
exchanger thermistor.
5 Remove the 4 screws
on the terminal board
and disconnect the
connecting wire.
6 Remove the screw and
remove the wire fixture.
7 Disconnect the
connector [S1] and
release the harness
from the hook.
8 Release the ferrite
core.
Removal Procedure
Procedure
Indoor heat exchanger thermistor
Terminal board
1 2 3
Connecting wire
[S1] Hook
Ferrite core
The position of the indoor
heat exchanger thermistor
varies by the model.
Be careful not to lose the clip
3
1 2 of the thermistor.
(R22045)
Cut the clamp if any.
Wire
fixture
(R18715)
[S1]: fan motor
3
1 2
(R18716)
(R9501)
Electrical Box
Points
Clip
(R11268)
Clamp
(R22132)
7