Swing Motors
Step
4
Remove the 2 pivots.
5
Remove the swing
motors.
6
Disconnect the
connector to remove
the swing motor.
2. Remove the swing motor
for vertical blades.
1
Remove the link cover.
18
Procedure
Swing motor (upper blade)
Swing motor (lower blade)
Link cover
Points
Reassembling order
(1) Set the swing motor for the
upper blade first.
(connector: white)
(2) Then, set the swing motor
for the lower blade.
(connector: red)
(3) Fix both the swing motors
with a screw.
(R9549)
(R9550)
(R9551)
(R9552)
Removal Procedure
Si041352EB