Daikin FTKM33NV2S Service Manual page 24

Fan Motor (Without Removing Indoor Heat Exchanger)
Step
5 Remove the fan motor
fixing plate (lower).
6 Remove the fan motor.
7 Remove the vibration
absorber.
22
Procedure Points
When reassembling the fan
motor and the fan rotor,
provide as much as 5 mm
(0.2 inch) of play between
the side face of the rotor and
the bottom frame.
(R9564)
Side face of rotor
5 mm (0.2 inch)
Fan motor
(1) Insert the fan motor with
approx. 5 mm (0.2 inch) left.
(2) Tighten the screw until it
stops. Then give the screw
one more turn.
(R9565)
(3) Rotate the fan rotor and
confirm the fan motor and
the fan rotor are installed
appropriately.
(4) Tighten the screw
completely if appropriate.
(5) If not appropriate, go back to
(1).
When reassembling, engage
the vibration absorber
completely.
(R9567)
Removal Procedure
Si041352EB
Side face of
bottom frame
(R18879)
(R9582)
Vibration
absorber
(R9566)