Audio Menu; Others Menu - JVC UX-GD6M Instructions Manual

AUDIO menu

Item
DIGITAL AUDIO OUTPUT
DOWN MIX
D.RANGE COMPRESSION

OTHERS menu

Item
RESUME
ON SCREEN GUIDE
Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear.
PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals.
DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a built-
in Dolby Digital decoder.
STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
This setting is effective for digital audio output if "DIGITAL AUDIO OUTPUT" is set to "PCM
ONLY."
DOLBY SURROUND: Select this when connecting to a surround decoder.
STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.
Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.
AUTO: You can enjoy powerful playback sound.
ON: Select this if the sound level of DVD Video is lower than the one of TV program to make the
sound at a lower volume clear.
You can select the Resume.
ON: The System resumes playback from the position where playback has been stopped if the disc is
still in the disc tray.
OFF: Resume is deactivated.
Activate (ON) or deactivate (OFF) the on-screen guide.
Contents
Contents
35