JVC UX-GD6M Instructions Manual page 40

Advanced Tape Operations
Recording on a Tape:
• The recording level is automatically set correctly. Thus, you
can adjust the sound you are actually listening to without
affecting the recording level.
• There is leader tape which cannot be recorded onto at the start
and end of cassette tapes. Thus, when recording CDs or radio
broadcasts, wind the leader tape first to ensure that the
recording will be made without any music part lost.
• If you start recording with no cassette inserted, "NO REC"
appears on the display. If a protected tape has been inserted,
"NO REC" appears.
• When using Reverse Mode for recording, start recording in the
3
forward ( ) direction first; otherwise, recording will stop
when only one side (reverse) of the tape is recorded.
• You can also change Reverse Mode setting (
after starting recording.
• You cannot open or close the disc tray while recording a disc.
Synchronized Disc Recording:
• When the tape reaches its end in the forward direction (
during recording with Reverse Mode set to
will be re-recorded at the beginning of the reverse side.
Enjoying Karaoke
(see pages 30 to 31)
Singing Along (Karaoke):
• Karaoke mode setting (Key Control and Vocal Cancel) can be
used only when the source is disc player (DVD/CD).
• Karaoke mode setting is automatically canceled when the
source is changed.
• Karaoke mode setting is also applied to the optical digital
output signals.
• When Vocal Cancel is activated, 3D Phonic will be canceled
temporarily.
• On some music disc, Vocal Cancel does not provide the
correct effect.
38
(see pages 28 to 29)
and )
3
)
, the last tune
Timer Operations
(see pages 32 to 33)
Setting the Timer:
• When using an external component—"AUX" for the playback
source, set the timer built in the component at the same time.
• Before turning off the power, do not forget to prepare the
required materials—a disc or tape for playback and a
recordable tape for recording.
• If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when timer is
activated.
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will not
work correctly.
Timer Priority:
• If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
• If you set the Sleep Timer after Recording Timer starts
recording, Recording Timer is canceled, but recording
continues until Sleep Timer shuts off the power.
Setup Menu Operations
General:
• If the upper and lower parts of the menu are cut off, adjust
the picture size control of the TV.
LANGUAGE menu:
• When the language you have selected for MENU
LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is
not recorded on a disc, the original language is used as the
initial language.
PICTURE menu—MONITOR TYPE:
• Even if "4:3 [MULTI] PS" is selected, the screen size may
become 4:3 letter box while playing a disc. This depends
on how the discs are recorded.
• When you select "16:9 [MULTI]" for a picture whose
aspect ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
OTHERS menu—ON SCREEN GUIDE:
• The setup menu and on-screen bar will be displayed (and
recorded) even though this function is set to "OFF."
Subtitles and the information for zoom-in always appear on
the display regardless of this setting.
(see pages 34 to 35)