Symbol LS 1004 Product Reference Manual page 72

LS 1004 Product Reference Guide
Data Format
This parameter sets the transmit data format. The options are:
7 Data Bits (With Parity) (default)
!
8 Data Bits (With Parity)
!
8 Data Bits (Without Parity)
!
7-Bit
Stop Bit Select
The stop bit(s) at the end of each transmitted character marks the end of transmission of one
character and prepares the receiving device for the next character in the serial data stream.
The number of stop bits (one or two) selected depends on the number the receiving terminal
is programmed to accommodate. Set the number of stop bits to match host device
requirements.
1 Stop Bit
Check Parity
This option determines whether the parity of received characters is checked. The type of
parity used is selectable through the PARITY parameter.
Check Parity of Receive
Data Enable
4-36
8-Bit
2 Stop Bits
Check Parity of Receive
Data Disable