Aux; Camera Input Operations - Clarion NX706 Owner's Manual

18. AUX

External peripheral devices, such as game consoles, camcorders, navigation units, phones, etc. can be connected
to the AUX connector on the back of this unit using the AV media cables.
Switching to AUX IN
Touch the [AUX] button on Main Menu to select the mode. If the external device connected to the AUX input has
an audio signal, the unit will broadcast audio of the external device. Press Menu button on
Operational Panel to return to the Main Menu.
You cannot directly control external devices connected to AUX input.

19. CAMERA INPUT OPERATIONS

Switching to Camera mode
Touch the [Camera] button on Main Menu.
The LCD will display the external camera video. The screen will display "No Video Signal" message, if a valid
camera is not connect to this device.
Press MENU button on Operational Panel to return to the Main Menu.
Setting Camera audio
Select "ON" button in the Camera Audio setting of the General setting.
The audio from camera will be heard when reverse gear is engaged. The volume control is available but not
indicated on the screen due to the safety.
Select the "MUTE" button to mute the audio while the reverse gear is engaged.
Select the "Off" button to play the audio while the reverse gear is engaged.
Note:
If the reverse cable is connected correctly to the car, the unit goes to camera mode automatically when the car is in
reverse.
As an additional safety feature, the audio from a camera with a built-in microphone can be heard
through the NX706.
NX706
45