Introduction; Installing The Stand Or Wall-Mount Bracket; Installing The Stand; Installing A Wall-Mount Bracket - Insignia NS19E320A13OM User Manual

NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 4 Thursday, February 9, 2012 3:19 PM

Introduction

Congratulations on your purchase of a high-quality
Insignia product. Your NS-19E320A13 or
NS-22E340A13 represents the state of the art in
LED TV design and is designed for reliable and
trouble-free performance.
Note
Most illustrations in this guide show the
NS-19E320A13. The same steps apply to the
NS-22E340A13 unless otherwise noted.
Installing the stand or
wall-mount bracket
Notes
• If you plan to wall-mount your TV, do not install
the stand.
• Store the stand and stand screws in case you
decide to use the stand in the future.

Installing the stand

To install the stand:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 Align the stand column with the back of the TV
screen, then secure the column to the screen
with three of the provided screws.
Screw type Screw length # of screws
M4
4
Insignia 19"/22" LED TV
14 mm 4
Stand column
www.insigniaproducts.com
NS-19E320A13/NS-22E340A13 Insignia 19"/22" LED TV
3 Make sure that the wide portion of the stand
base faces the front of your TV, then align the
stand with the stand column and secure the
stand to the stand column with one of the
provided screws.

Installing a wall-mount bracket

Warning
This TV is intended to be supported by a UL Listed
wall mount bracket with suitable weight/load. (See
"Miscellaneous (both
To attach your TV to a wall-mount bracket:
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect the screen
from damages and scratches.
2 If the stand is attached, remove the three screws
holding the TV to its stand column, then remove
the stand.
models)" on page 53.)