Table of Contents
Advertisement
NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 15 Thursday, February 9, 2012 3:19 PM
Insignia 19"/22" LED TV
Connecting a camcorder or game console
Note
If your camcorder or game console has an HDMI
connection, we recommend that you use the HDMI
connection to get the best quality possible.
To connect a camcorder or game console:
1 Make sure that your TV's power cord is
unplugged and the camcorder or game console
is turned off.
2 Connect an AV cable (not provided) to the
AV IN VIDEO jack and L/R AUDIO jacks on the
side of your TV and to the AV OUT jacks on the
camcorder or game console.
Note
•
The AV IN VIDEO jack shares the L/R AUDIO
jacks with the COMPONENT IN video jacks.
•
When you connect the audio using the
L/R AUDIO jacks, the audio output is analog.
Cables are often color-coded to
match color-coded jacks.
Note: The yellow video connector
on the AV cable connects to the
green AV IN VIDEO jack.
Camcorder or
game console
3 Plug your TV's power cord into a power outlet,
turn on your TV.
4 Turn on the camcorder or game console, then
set it to the correct output mode. For more
information, see the documentation that came
with the camcorder or game console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
to select COMP/AV, then press
or
ENTER.
Notes
You can also press VIDEO to select the camcorder or
game console.
Side of TV
AV cable
www.insigniaproducts.com
Connecting a computer
Using VGA
To connect a computer using VGA:
1 Make sure that your TV's power cord is
unplugged and the computer is turned off.
2 Connect a VGA cable (not provided) to the VGA
jack on the back of your TV and to the VGA jack
on the computer.
Back of TV
VGA
PC/DVI AUDIO
DIGITAL
OUTPUT
/
PC IN
(COAXIAL)
AUDIO OUT
Audio cable with stereo mini plug
VGA cable
3 Connect an audio cable with a stereo mini plug
(not included) to the PC/DVI AUDIO jack on the
back of your TV and to the AUDIO OUT jack on
the computer.
4 Plug your TV's power cord into a power outlet,
turn on your TV and the computer.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
to select VGA, then press ENTER.
or
7 Adjust the display properties on the computer,
if necessary.
ANT/
CABLE IN
15
Advertisement
Table of Contents
