Table of Contents
Advertisement
NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 13 Thursday, February 9, 2012 3:19 PM
Insignia 19"/22" LED TV
Using DVI (same as HDMI but requires a sound
connection)
To connect a DVD or Blu-ray player using DVI:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
DVD or Blu-ray player.
3 Connect the other end of the cable to the
HDMI 1 (DVI) jack on the side of your TV.
Back of TV
V G A
P C /DV I A U DIO
DIG ITA L
/
O U T P U T
P C I N
AU DIO O U T
( C O AXIAL )
DVD or Blu-ray player
4 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO jack on the back your TV
and to the AUDIO OUT jacks on the DVD or
Blu-ray player.
5 Plug your TV's power cord into a power outlet,
then turn on your TV.
6 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
7 Press INPUT to open the INPUT SOURCE list.
8 Press
to select HDMI 1, then press
or
ENTER.
Note
You can also press HDMI one or more times to select
the DVD or Blu-ray player.
Side of TV
AN T /
C AB L E I N
HDMI cable with
HDMI-DVI adapter
www.insigniaproducts.com
Using component video (better)
To connect a DVD or Blu-ray player using
component video:
1 Make sure that your TV's power cord is
unplugged and the DVD or Blu-ray player is
turned off.
2 Connect a component video cable (not
provided) to the COMPONENT IN Y/P
on the side of your TV and to the COMPONENT
OUT jacks on the component video device.
Cables are often color-coded
to match color-coded jacks.
DVD or Blu-ray player
Audio cable
3 Connect an audio cable to the L/R AUDIO jacks
on the side of your TV and to the L/R AUDIO
OUT jacks on the DVD or Blu-ray player.
Notes
•
The COMPONENT IN video jacks share the
audio jacks with the AV IN VIDEO jack.
•
When you connect the audio using the
L/R AUDIO jacks, the audio output is analog.
4 Plug your TV's power cord into a power outlet,
then turn on your TV.
5 Turn on the DVD or Blu-ray player, then set it to
the correct output mode. For more information,
see the documentation that came with the
player.
6 Press INPUT to open the INPUT SOURCE list.
7 Press
to select COMP/AV, then press
or
ENTER.
Note
You can also press VIDEO to select the DVD or Blu-ray
player.
/P
jacks
B
R
Side of TV
13
Advertisement
Table of Contents
