Insignia NS19E320A13OM User Manual page 25

NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 21 Thursday, February 9, 2012 3:19 PM
Insignia 19"/22" LED TV
11 Press or to highlight Antenna, Cable, or
Satellite Box, then press ENTER.
A If you select Antenna, your TV scans for
available channels. The scan may take
several minutes.
Scanning for Channels
Channel scan may take 20+ minutes
Move OK
E NTE R
Channel scan may take 20+ minutes
During scanning, your TV searches for
digital channels first. When the digital
channel search is complete, a message
appears asking if you want to search for
analog channels. Select Yes to continue
searching for analog channels, or select No
to stop searching for channels.
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
B If you select Cable, a message asks if you
have a cable box.
Do you have a Cable Box?
Move
OK
E NTE R
• Select No, then press ENTER if no cable
box is connected. Your TV scans for
available channels. The scan may take
several minutes.
Digital Channels
Analog Channels
Select Previous Exit
ME NU E XIT
No
Yes
Previous
Select Exit
ME NU E XIT
www.insigniaproducts.com
• Select Yes, then press ENTER if a cable box
is connected. A message asks how you
connected the cable box to your TV:
How did you connect the
cable box to the TV?
AV, Component, or HDMI
Coaxial
Move OK Select Previous
ME NU
E NTE R
• Select AV, Component, or HDMI, then
press ENTER if you connected a cable
box to your TV using one of these
cables. Read the message, then press
ENTER to close the wizard.
• Select Coaxial, then press ENTER if
you connected a cable box to your TV
using a coaxial cable. Read the
message, then press ENTER to start the
channel scan (VHF channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
C If you select Satellite Box, a message asks
how you connected the satellite box to
your TV:
How did you connect the
satellite box to the TV?
AV, Component, or HDMI
Coaxial
Move Select Previous
OK
ME NU
E NTE R
• Select AV, Component, or HDMI, then
press ENTER if you connected a satellite
box to your TV using one of these cables.
Read the message, then press ENTER to
close the wizard.
• Select Coaxial, then press ENTER if you
connected a satellite box to your TV using
a coaxial cable. Read the message, then
press ENTER to start the channel scan (VHF
channels only).
Note
You can press EXIT to stop the auto channel search,
but you will need to run the auto channel search
again to create a channel list.
Exit
E XIT
Exit
E XIT
21