Table of Contents
Advertisement
NS-19E320A13_NS-22E340A13_11-1256_MAN_V1_ENG.book Page 19 Thursday, February 9, 2012 3:19 PM
Insignia 19"/22" LED TV
Using the remote control
Installing remote control batteries
To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
Cautions
•
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
•
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
•
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
•
Do not mix batteries of different types.
•
Do not mix old and new batteries.
•
Remove batteries when the charge is depleted.
•
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
Aiming the remote control
To aim the remote control:
• Point the remote control towards the remote
sensor on the front of your TV.
www.insigniaproducts.com
16.4 ft. (5 m)
19
Advertisement
Table of Contents
