Grandstream Networks GXV34 0 Series Manual page 69

Automatic Upgrade
Firmware Upgrade and Provisioning
Upgrade with Prompt
Allow DHCP Option 150, 43, 160 and 66 Override Server
Allow DHCP Option 120 to Override SIP Server
Allow DHCP Option 242 (Avaya IP Phones)
Download And Process All Available Config Files
Config Provision
Specifies when the firmware upgrade process will be initiated;
there are 4 options:
1. No: The phone will only do upgrade once at boot up.
2. Check every interval: User needs to specify "number of
minutes"
3. Check every day: User needs to specify "Hour of the day
(0-23)".
4. Check every week: User needs to specify "Hour of the
day (0-23)" and "Day of the week (0-6)".
Note: Day of week is starting from Sunday.
The default setting is "No".
Specifies how firmware upgrading and provisioning request to
be sent.
● Always Check at bootup.
● When Firmware/Config File Pre/Suffix Changes.
● Skip the Firmware Check.
If set to "Yes", the phone will pop up a prompt after
downloading the firmware files to confirm whether start
upgrading. Otherwise, the phone will automatically start
upgrading process.
The default setting is "Yes".
DHCP Option
Obtains configuration and upgrade server's information from
DHCP server using options 43, 160 and 66.
If DHCP option 43, 160 and 66 is enabled on the LAN side, the
device will reset the CPE, upgrade, network VLAN tag, and
priority configuration according to option 43 sent by the
server. At the same time, the update mode and server path of
the configuration upgrade mode will be reset according to the
option 160 and 66 sent by the server.
Default setting is "Yes".
Configures the phone system to allow the DHCP offer
message to override the Config Server Path via the Option
120 header.
Default setting is "Yes".
Enables DHCP Option 242. Once enabled, the phone will use
the configuration info issued by the local DHCP in Option 242
to configure proxy, transport protocol and server path.
The default setting is "Yes".
Config provision
By default, the device will provision the first available config in
the order of cfgMAC, cfgMAC.xml, cfgMODEL.xml, and cfg.xml
(corresponding to device specific, model specific, and global
configs). If set to "Yes", the device will download and apply
(override) all available configs in the order of cfgMAC, cfg.xml,
cfgMODEL.xml ,cfgMAC.xml.
Default is "No".
Device will download configuration files and provision by
configured order.