Grandstream Networks GXV34 0 Series Manual page 60

Trap
Configures the interval between each trap sent to the trap receiver.
Interval(m)
Trap Configures community name associated to the trap. It must match the community name of the trap
Community receiver.
Network Settings/Affinity Settings
Configures whether to enable the Affinity feature. Note: The Affinity CTI function can only be used when
Affinity Support
the phone has a registered account.
Preferred Account Selects SIP account for Affinity.
System Settings Page Definitions
System Settings/Time and Language
NTP Server
NTP Update Interval
(m)
Allow DHCP Option 42
to Override NTP Sever
Allow DHCP Option 2
to Override Time Zone
Setting
Time Zone
Table 35 : Network Settings/SNMP Settings
Table 36: Network Settings/Affinity Settings
Time Settings
Defines the URL or IP address of the NTP server. The phone may obtain the current date and time
information from the server. The default setting is "pool.ntp.org".
This allows the user to configure interval for updating time from the NTP server. Valid value is
between 5 and 1440 minutes. If set to 0, it will follow the default update rules. Default value is 0.
Obtains NTP server address from a DHCP server using DHCP Option 42; it will override configured
NTP Server. If set to "No", the phone will use configured NTP server to synchronize time and date
even if a NTP server is provided by DHCP server.
The default setting is "Yes".
Obtains time zone setting (offset) from a DHCP server using DHCP Option 2; it will override selected
time zone.
If set to "No", the phone will use selected time zone even if provided by DHCP server. The default
setting is Yes.
Specifies the local time zone for the phone. It covers the global time zones and user can selected
the specific one from the drop-down list.