Furuno FR-10 Operator's Manual page 141

1
System -
Range Unit (NM, km, SM)
1
Units*
Ship Speed Unit (kn, km/h, mph)
System - QV Display (Off, On)
TT Echo Level (1 to 31)
1
Advanced* Echo Size (1 to 10)
Land Size (100m to 2000m)
Auto Acq. Corr. (1 to 10)
Auto Acq. Erase (1 to 10)
Gate Size (1 to 10)
Filter Response (1 to 10)
Lost Count (1 to 20)
Target Vect Start (Time, Scan)
Start Time*
Start Scan*
Antenna Length (1.0m, 1.2m, 1.8m)
TT Default (Yes, No)
System - SBAS Mode (Off, On)
SCX-20* 1 Offset HDG (-180.0° to 180.0°; 0.0°)
Offset Pitch (-10.0° to 10.0°; 0.0°)
Offset Roll (-10.0° to 10.0°; 0.0°)
Smoothing SOG/COG (0000s to 9999s; 0000s)
Smoothing ROT (0s to 30s; 0s)
PGN Settings
Factory Reset (Yes, No)
System - Datum (WG84, WG72, Other)
SCX-21* 1 Datum Number (003 to 173)
SBAS Mode (Off, On)
Offset HDG (-180.0° to 180.0°; 0.0°)
Offset Pitch (-10.0° to 10.0°; 0.0°)
Offset Roll (-10.0° to 10.0°; 0.0°)
Smoothing SOG/COG (0000s to 9999s; 0005s)
Smoothing ROT (0s to 30s; 5s)
Port1 Setting
Port2 Setting
Port3 Setting
Factory Reset
System - Main/Sub Radar
1 NMEA LAN Output (Off, On)
Installation*
TTM Output Setting (Normal, Legacy)
Own Ship Length (15m to 999m)
Own Ship Beam (5m to 999m)
RV.Alert Hysteresis (10min, 15min, 20min, 25min, 30min, 60min, 100min)
Demo Mode (Off, Internal)
Demo Echo Type (DRSX-Class, DRS-NXT)
Antenna Rotation (Rotate, Stop)
Rotation Speed (24rpm, Auto)
STC Range (0 to 10; 3)
Near STC Level (1 to 4; 2)
A/C Auto Adjust (-10 to 10; 0)
Heading Allignment (0.0° to 359.9; 0° )
Sweep Timing (-10 to 10; 1)
MBS Adjustment (0 to 255)
Magnetron Readjust (Yes, No)
Total On Time (000000.0H to 999999.9H)
Total TX Time (000000.0H to 999999.9H)
Alert Out Type (ExternalBuzzer, AlarmOut, OperatorFitness)
Input Datum (WGS-84, Tokyo)
Geodetic Datum (WGS-84, Tokyo)
Memory Reset (Yes, No)
1
2 (0s, 20s to 60s)
3
(0, 8 to 25)
APPENDIX 1 MENU TREE
*1
: Accessible only by qualified technician.
Do not change these settings.
*2
: Available when [Target Vec Scan] is set to [Time].
*3
: Available when [Target Vec Scan] is set to [Scan].
AP-5