Controls; Nomenclature; Names Of Buttons And Their Functions; Major Button Operations When External Equipment Is Connected To This Unit - Clarion ADZ625 Owner's Manual

3. CONTROLS / LES COMMANDES / CONTROLES /
Source unit / Appareil pilote / Unidad fuente /
[CD IN] [ISR]
[TAPE IN]
[SPE/ANA]
[REMOTE]
[EQ]
[A]
[RESET]
[ ]
[VOLUME]
[MUTE]
[FNC]
[RDM]
[ ],[ ] [RPT]
[SCN]
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
5
ADZ625

4. NOMENCLATURE

Note:
• Be sure to read this chapter referring to the front diagrams of chapter "3. CONTROLS" on page 5 (unfold).
Names of the Buttons and their Functions
[REMOTE]
• Receiver for remote control unit.
[TAPE EJECT]
[SPE/ANA] button
• Press to change the spectrum analyzer display.
[CD EJECT]
[TAPE IN]
• Cassette tape insertion slot.
[CD IN]
• CD insertion slot.
[ISR] button
• Recalls ISR radio station in memory.
Press and hold for 2 seconds or longer: Stores
[DSP]
current station into ISR memory (radio mode
only).
[T]
[TAPE EJECT] button
• Ejecting a tape.
[CD EJECT] button
[M]
• Ejecting a CD.
[DSP] button
• Press to select the DSP menu, and to set DSP
[PRESET]
effects to ON/OFF.
[DISP]
[T] button
• Use the button to input a title in the CD mode.
[BND]
• Press and hold the button for 1 second or
longer to enter the adjust mode.
[M] button
• Use to change and store items in preset
memory.
[PRESET] knob
• Stores a station into memory or recall it directly
while in the radio mode.
• In DSP/EQ mode, use to select menu.
• In adjust modes, use to select items for
adjustment.
Note:
To operate [PRESET] knob:
• Turn knob about 30 deg. (adjust item will change).
• Release finger (knob will return to original
position).
• Turn knob again (adjust item will change).
6
ADZ625
[DISP] button
• Switches the display indication (Main
display,sub display,clock display).
[BND] button
• Switches the band, or seek tuning or manual
tuning while in the radio mode.
• Plays a first track while in the CD mode.
• In tape mode, changes the side played
(direction of tape travel).
[RDM] button
• Performs random play while in the CD mode.
• Select Dolby noise reduction while in the tape
mode.
[RPT] button
• Plays repeatedly while in the CD mode.
• In the tape mode, enables repeat play. When
held depressed for one second or more,
enables blank-skip mode.
[SCN] button
• Performs preset scan while in the radio mode.
When the button is pressed and held, auto
store is performed.
• Performs scan play for 10 seconds for each
track while in the CD mode.
[ ], [ ] buttons
• Selects a station while in the radio mode or
selects a track when listening to a CD. These
buttons are used to make various settings.
[FNC] button
• Press the button to turn on the power.
Press and hold the button for 1 second or
longer to turn off the power.
• Switches the operation mode among the radio
mode, etc.
[MUTE] button
• Turns mute on and off.
[VOLUME] knob
• Adjust the volume by turning the knob clock-
wise or counterclockwise.
• Use the knob to perform various settings.
[ ] button [T] button
• Plays or pauses a CD while in the CD mode. • Use the button to input a title in the CD changer
mode.
• After selecting various setting options, press
• Use the button to scroll the title during CD-text
this button to confirm the settings.
play or MD changer play in the CD changer
[RESET] button
mode.
• Press under the following conditions.
[ ] button
1. Nothing happens when buttons are pressed.
• Plays or pauses a CD or MD.
2. Display is not accurate.
[ ], [ ] buttons
[A] button
• Selects a track when listening to a disc.
• Press and hold the button for 1 second or longer
to turn the loudness on or off. [BND] button
• Use the button to switch to the audio mode
• Plays a first track.
(bass/mid/treble, balance/fader adjustment)
[EQ] button
G When the TV is connected
• Press to select EQ menu or and to set EQ
∗ For details, see the section "TV Operations".
effects to ON/OFF.
[SCN] button
• Performs preset scan while in the TV mode.
When the button is pressed and held, auto store
Major button operations is performed.
[PRESET] knob
when external equipment
• Stores a station into memory or recall it directly.
is connected to this unit
[ ], [ ] buttons
• Selects a station.
G When the CD/MD changer is
[BND] button
connected
• Switches the band, or seek tuning or manual
∗ For details, see the section "CD/MD Changer
tuning.
Operations".
[SCN] button
• Performs scan play for 10 seconds for each
track. Disc scan play is performed when the
button is pressed and held.
[RPT] button
• Performs repeat play. When this button is
pressed and held, disc repeat play is performed.
[RDM] button
• Performs random play. Also performs disc ran-
dom play when the button is pressed and held.
[PRESET] knob
• Use to select the number of the disc loaded,
and to start play.
[DISP] button
• Switches the disc titles or track titles while in
the MD changer mode.
• Switches the user titles or track titles etc. while
in the CD changer mode.
7
ADZ625