Error Displays - Clarion ADZ625 Owner's Manual

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
A CD is caught inside the CD deck and is
ERROR 2
not ejected.
A CD cannot be played due to scratches,
ERROR 3
etc.
A CD is loaded upside-down inside the
ERROR 6
CD deck and does not play.
Tape cannot be played due to defective
ERROR 1
tape such as cut tape.
Tape is caught and cannot be played.
ERROR 2
Tape mode cannot be detected.
ERROR 4
Tape is caught and cannot be ejected.
ERROR 8
A CD inside the CD changer is not
ERROR 2
loaded.
A CD inside the CD changer cannot be
ERROR 3
played due to scratches, etc.
A CD inside the CD changer cannot be
ERROR 6
played because it is loaded upside-down.
Displayed when the temperature in the
ERROR H
MD changer is too high and playback has
been stopped automatically.
An MD inside the MD changer is not
ERROR 2
loaded.
An MD inside the MD changer cannot be
ERROR 3
played due to scratches, etc.
An MD inside the MD changer cannot be
ERROR 6
played because it is loaded upside-down.
Displayed when a non-recorded MD is
loaded in the MD changer.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Cause
Measure
This is a failure of CD deck's mechanism
and consult your store of purchase.
Replace with a non-scratched,
non-warped-disc.
Eject the disc then reload it properly.
Eject the tape then replace it with a new
one.
Remove the caught or wound tape.
This is a failure of tape mechanism and
consult your store of purchase.
Eliminate the reason for which the tape is
caught.
This is a failure of CD changer's
mechanism and consult your store of
purchase.
Replace with a non-scratched, non-
warped disc.
Eject the disc then reload it properly.
Lower the surrounding temperature and
wait for a while to cool off MD changer.
This is a failure of MD changer's
mechanism and consult your store of
purchase.
Replace with a non-scratched, non-
warped disc.
Eject the disc then reload it properly.
Load a pre-recorded MD in the MD
changer.
27
ADZ625