Operations Of Accessories; Cd/Md Changer Operations - Clarion ADZ625 Owner's Manual

8. OPERATIONS OF ACCESSORIES

CD/MD Changer Operations

CD/MD changer functions
When an optional CD/MD changer is connected
through the CeNET cable, this unit controls all
CD/MD changer functions. This unit can control
a total of 2 changers (MD and/or CD).
Press the [FNC] button and select the CD(MD)
changer mode to start play. If 2 CD(MD) chang-
ers are connected, press the [FNC] button to
select the CD(MD) changer for play.
∗ If "NO MAGA" appears in the display, insert the
magazine into the CD changer. "CHECK" appears
in the display while the player loads (checks) the
magazine.
∗ If "NO DISC" appears in the display, eject the maga-
zine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
∗ If "NO DISC" appears in the display, load MDs into
the MD changer.
CAUTION
CD-ROM discs and CD-R discs cannot be
played in the CD changer.
Pausing play
1. Press the [ ] button to pause play.
"PAUSE" appears in the display.
2. To resume play, press the [
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
∗ Title data for CD-text CDs can be displayed with
this unit only when it is connected to CDC655Tz.
G When connected to CDC655z or CDC1255z
Press the [DISP] button to display the title.
G When connected to CDC655Tz
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] but-
ton for 1 second or longer, the title display
changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ CD-
text title (track) ➜ user title (disc)...
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, "USER TTL" appears in the
display.
22
ADZ625
• If a CD-text CD is not input its disc title or a track
title, "TEXT D TTL" or "TEXT T TTL" appears in the
display.
Switching disc titles and track titles
(MD)
This unit can display disc titles and track titles
already entered on MDs. Titles up to 128 char-
acters long can be displayed by scrolling the titles.
∗ Titles cannot be entered for MDs with this unit.
1. Press the [DISP] button to display the title.
2. Each time you press and hold the [DISP] but-
Note:
• If an MD is not input its disc title or a track title," D
TITLE" or " T TITLE" appears in the display.
Procedure to scroll a title
Set "AUTO SCROLL" to "AUTO" or "OFF". (The
factory default setting is "AUTO". Refer to
subsection "Adjusting the way of title scrolling"
in section "Operations Common to Each Mode".)
G When set to "AUTO"
The title is automatically kept scrolling.
G When set to "OFF"
] button again.
Press the [T] button to scroll the title.
Selecting a CD/MD
Turn the [PRESET] knob either clockwise or
counterclockwise to select a CD or MD.
∗ Use to select the number of the disc loaded, and
to start play.
Selecting a track
G Track-up
1. Press the [
2. Each time you press the [
G Track-down
1. Press the [
2. Press the [
The disc title or track title is displayed.
ton for 1 second or longer, the display toggles
between the disc title and the track title.
] button to move ahead to the
beginning of the next track.
track advances ahead to the beginning of the
next track.
] button to move back to the
beginning of the current track.
] button twice to move to the
beginning of the previous track.
] button, the