Section 4 − Installation; Selecting A Location - Miller HYDRACOOL 1 V.115 50/60HZ Owner's Manual

B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC 61000-3-11 and IEC 61000-3-12.
C. Temperature Specifications
Operating Temperature Range
−10 to 40°C (14 to 104 °F)
.
The correction factor on the cooling power at an ambient temperature of 1045F (405C) is 0.625.

4-1. Selecting a Location

.
Position unit so air can circulate.
500 mm
OM-254203 Page 6
SECTION 4 − INSTALLATION
500 mm
500 mm
Storage/Transportation Temperature Range
20 to 25°C (68 to 77 °F)
500 mm
ce-emc 4 2014-07
Temp1_016- 08
!
Do not move or operate
unit where it could tip.
500 mm
500 mm
956142899_1-A, 956142900_1-A