Manual Memory; Auto Store; Preset Scan; Switching The Vtr System Between Ntsc And Pal - Clarion VRX6671Z Owner's Manual & Installation Manual

Manual memory

1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the cur-
rent station to that preset memory.

Auto store

Auto store selects 6 TV stations automatically and
stores each one into a preset memory.
If there are not 6 stations with good reception,
stations previously stored in memory remain and
only the strong stations are stored into memory.
1. Press the BAND button % and select the de-
sired TV band. (TV1 or TV2)
2. Press and hold the AS/PS button 5 for 2 sec-
onds or longer. The stations with good recep-
tion are automatically stored to the PRESET
buttons # .

Preset scan

Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for desired TV station in memory.
1. Press the AS/PS button 5.
2. When the desired channel is received, press
the AS/PS button 5 again.
Switching the VTR system between
NTSC and PAL
This function is enabled only when the panel is
open.
Switch to the VTR mode you use.
1. Press the ADJ button * to switch to the ad-
justment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward to move the cursor to "VTR N/P".
3. Operate the JOYSTICK ¡ rightward or left-
ward to move the cursor to select "NTSC" or
"PAL".
4. Press the ENT at the center of the JOYSTICK
¡ to set the selected VTR mode.

Setting the TV diver

This function is enabled only when the panel is
open.
Normally use the TV diver with the "ON" position.
You can change the reception setting for the TV
antenna connected to the TV tuner.
1. Press the ADJ button * to switch to the ad-
justment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select "TV DIVER".
3. Operate the JOYSTICK ¡ rightward or left-
ward to select "ON" or "OFF" and press the
ENT at the center of the JOYSTICK ¡ to set
the selected reception setting.
ON:
Sets reception emphasizing the visual.
OFF:
Sets the diver setting to OFF.
4. Press the ADJ button * return to the previ-
ous mode.
TV Operations
27
VRX6671z