Adjusting The Brightness And Tone Of; Changing Over Tv Display Size; Color - Clarion VRX6671Z Owner's Manual & Installation Manual

TV Operations
Adjusting the brightness and tone
of color
Notes:
• This operation is available only when the car is
stopped and the parking brake is applied.
• This function is not available when the display is
stored.
• The HUE setting can be adjusted only when the
NTSC mode is selected.
1. Press the ADJ button * to switch to the ad-
justment selection display.
2. Operate the JOYSTICK ¡ upward or down-
ward to select the option "MONI ADJ" (by
moving the cursor).
3. Press the ENT at the center of the JOYSTICK
¡.
4. Operate the JOYSTICK ¡ rightward or left-
ward to select "BRIGHT","COLOR" or "HUE"
(by moving the cursor).
"BRIGHT":
Adjust the brightness of the display.

"COLOR":

Adjusts the color saturation.
"HUE":
Adjusts the tone of color (red is emphasized
or green is emphasized.)
5. Operate the JOYSTICK ¡ upward or down-
ward to adjust a level.
6. When the adjustment is made, operate the
JOYSTICK ¡ rightward or leftward to move
the cursor to "MENU". Then press the ENT at
the center of the JOYSTICK ¡ to return to
the adjustment selection display.
28
VRX6671z

Changing over TV display size

This function is available only when the panel is
open.
Press the WIDE button 7 to change over the
TV display size. Each time you press the
WIDE button 7, the TV display size changes
in the following order:
"NORMAL" "WIDE"
EMA" "NORMAL"
"NORMAL": (normal display)
There is a black area at both right and left
ends of a display. In case of normal TV broad-
casting (4:3), the image can be shown with-
out being cut or deformed.
"WIDE": (wide mode)
The image at right and left ends in a display
elongates horizontally.
"F. WIDE": (full wide mode)
The whole image elongates horizontally.
"CINEMA": (cinema mode)
The image at both top and bottom in a dis-
play disappears.
Notes:
• When a normal 4:3 size image, not being a wide
one, is viewed by displaying it fully on a wide TV
display in a wide mode or a full-wide mode, a part
of the peripheral image will be lacking or deformed.
In deference to the intention of producer, an origi-
nal image can be viewed in a normal mode.
• During superimposed display, it becomes a full-
wide mode.
"F. WIDE" "CIN-