Manual Memory - Clarion NX509E Owner's Manual & Installation Instructions

Recalling a preset station
There are total of 30 preset positions (6-FM
Home 1, 6-FM Home 2, 6-AM Home, 6-FM
Travel, and 6-AM Travel) to store individual radio
stations in memory.
1. Touch the [Home Travel] key to select the
Home or Travel mode.
2. Touch the [Band] key to select the band.
3. Touch the corresponding Preset key to recall
the stored station.
• Touching and holding the desired Preset
key for more than 2 seconds will store the
current station to the preset memory.

Manual memory

1. Touch the [Home Travel] key to select the
Home or Travel mode.
2. Touch the [Band] key to select the band you
wish to store.
3. Tune in the station you wish to store using the
seek tuning, manual tuning, or preset tuning.
4. Touch and hold the desired Preset key you
wish to store the current station for more than
2 seconds.
Auto Store
The Auto Store is a function for storing up to 6
stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains
unoverwritten at the memory position.
• The Auto Store function works only in the
Travel mode.
1. Touch the [Home Travel] key to select the
Travel mode.
2. Touch the [Band] key to select the band.
3. Touch the [Auto Store] key to start scanning
stations.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
• "AS" appears during scanning stations. To
stop the scanning, touch the [Auto Store]
key again.
Scrolling radio text
When the current station broadcasts text data, it
is displayed on the Tuner mode screen. When
the text is longer than the text area, you can
confirm the entire text by scrolling it.
1. Touch the text area.
The text will scroll once.
❏ About the RDS (Radio Data
System)
This unit has a built in RDS decoder system that
supports broadcast stations transmitting RDS
data. This system can display the name of the
broadcast station being received (PS), and can
automatically switch to the broadcast station with
the best reception as you move long distances
(AF switching). Also, if a traffic announcement or
program type information is broadcast from an
RDS station, no matter what mode you are in, this
broadcast is received. Additionally, if EON
information is received, this information enables
automatic renewal of other preset stations on the
same network and interruption of traffic
announcement and/or chosen program type from
other stations (TP). This function is not available
in some areas.
"AF" : Alternative Frequency
"PS" : Program Service Name
"PTY" : Program Type
"EON": Enhanced Other Network
"TP" : Traffic Program
• The RDS interrupt does not function during AM
(MW/LW) radio reception.
❏ AF (Alternative Frequency)
function
The AF function switches to a different frequency
on the same network in order to maintain
optimum reception.
Switching ON/OFF the AF function
1. Touch the [Options] key.
2. Touch the [On] or [Off] key of the AF item to
turn the function on or off.
• When the AF function is ON, "AF" will be
displayed at the top of the screen.
• If the reception of the current broadcast
station deteriorates durably, "AF" indication
will blink, and this unit searches for the
same program on another frequency.
23