Summary of Contents for Porsche Home Energy Manager
Page 1
Home Energy Manager Good to know – Driver’s Manual...
Page 2
Installation manual Dr. Ing. h.c. F. Porsche AG from what is described in this manual. If your Porsche Always keep this installation manual and hand it over Vertrieb Customer Relations is fitted with any equipment not described in this to the new owner if you sell your charger.
Page 3
You can access the full Driver's Manual at the follow- Possible serious injury or WARNING ing web address: death https://tinyurl.com/porsche-e-help Failure to observe Warning notices in the "Warning" category can result in serious injury or death. Possible moderate or mi- CAUTION nor injury Failure to observe Warning notices in the "Caution"...
Security Security Applicable documents Description Type Information Info External mains power supply STEP-PS/ 1AC/24DC/0.75, article number 2868635 www.phoenixcontact.com unit Push-on connector 2x1754571, 1x1790108, 1x1790111, 3x1790124, www.phoenixcontact.com 1x1939439 WiFi antenna HiRO H50284 Wireless 802.11n 2.4GHz WiFi Gain only 2.4 GHz mains compati- www.hiroinc.com 2dBi OMNI bility...
Security – Disclaimer Ability to select suitable tools, testers and, if If the installation environment requires Overvoltage necessary, personal protective equipment, as Category III (OVCIII), the input side of the external If the energy manager is damaged due to transport, well as the electrical installation materials for power supply must be equipped with protective cir- storage or handling, repairs are not possible.
3x current converters in version 100 A – or – (de- pending on the country variant) 2x current con- verters in version 200 A One set of connectors Spare parts and accessories You can order spare parts and additional current con- verters from your Porsche partner.
Overview Overview Example of domestic installation Fig. 2: Example of domestic installation with photovoltaic system and sub-distribution unit Power supply (1 or 3-phase, here: 1-phase) Electricity meter Current converter (1 current converter per phase) Distribution box Consumers in the home EEBus protocol Inverter Photovoltaic system Sub-distribution unit...
Overview Connection diagram Displays and controls Displays Description LED lights up green: Client mode, WiFi connection available LED lights up or flashes blue: Paral- lel operation in client mode is possi- ble. LED flashes yellow: WiFi connection via WPS LED flashes green Searching for PLC network connection.
Por- than 10 seconds. 2/3/4 Current converter (J301), sche Home Energy Manager on the Porsche Current converter (J300), For a PLC connection to a cli- website at the following address: Current converter (J200) ent, briefly press the PLC pair- https://tinyurl.com/porsche-e-help...
Page 11
Overview Connections on underside of device Fig. 6: Overview of connections on underside of device USB1 USB2 ETH 0 ETH 1 RS485/CAN (J1000) (not assigned) Power supply (J102), 24 V (DC) Relay (J900) (not assigned) Relay (J901) (not assigned) g Refer to chapter "Overview of connectors" on page...
Pay attention to connector orientation when plugging phase fuse, as you will be asked for this information in Home Energy Manager! Pins 1, 3, 5, 7 are rounded later on when configuring the energy manager (in- Fig. 7: Overview of J200/J300/J301 and pins 2, 4, 6, 8 are rectangular.
Page 13
Connector part number 1790108 Information Pay attention to connector orientation when plugging Overview of J102 connector in Home Energy Manager! Pins 1, 3 are rounded and pins 2, 4 are rectangular. Connector for relay contact Parameter Value Fig. 8: Overview of J400...
CAN High Overview of J1000 connector Information Pay attention to connector orientation when plugging in Home Energy Manager! Pins 1, 3, 5 are rounded and pins 2, 4, 6 are rectangular. Fig. 10: Overview of J900/J901 Connection to the power grid...
Page 15
Installation and connection The energy manager does not have any internal fuses. The voltage measurement, external power supply and relay inputs must therefore be fitted with suitable backup fuses. – Use of the energy manager requires overcurrent protection for all supply leads. Make sure you se- lect fuses with a sensitive trigger characteristic.
Web Applica- phase in the domestic connection matches the phase tion. at the Porsche charger connection and, if applicable, the inverter phase of the photovoltaic system. Phase If you need to extend the measurement leads, use the shifts should not exist anywhere, as otherwise the same type of lead if possible.
You will find a video for sin- – The intelligent charging cable features a multi- by mistake. This can damage the energy manager. gle-phase installation on the Porsche website at phase connection (electrical socket or perma- By inserting the 6-pin connector without connecting the following address:...
Page 18
Select the installation locations of the en- ergy manager and the current consumers with PLC functionality (such as the Porsche charger) as instal- lation locations for this. The real data transfer rate between the installation locations can be visually dis- played using powerline software.
– Private data such as the access data of your home network and the access data of the user profile (to link it with your Porsche ID) do not need to be specified. – Information on electricity tariffs/prices and any...
2. On your device, press the network or WiFi icon the address bar of your browser. on the taskbar or notification panel. g Refer to the Porsche Home Energy Manager Oper- Redirecting to Web Application 3. Select your WiFi network from the list. The name ating Manual.
Page 21
Establishing a connection to the device On the PLC modem, enter the security code of the energy manager to register it in the PLC network. – or – Press the pairing button on the PLC modem, then press the PLC button on the energy man- ager within 60 seconds.
Web Application: Home user and Customer serv- ice. The Customer service user may only be used by a qualified electrician or Porsche service partner. The qualified electrician is responsible for setting up the energy manager. He carries out the setup wizard in- cluding home installation and has access to all the configuration options in the web application.
Starting Initial Installation Starting Initial Installation 2. Set language, country and currency Select Next to consent to the data privacy infor- mation. The setup wizard guides the qualified electrician Field Explanation Information through the entire installation via individual steps. Language Select the language for Web Ap- To complete a step in the setup wizard, enter the Legal information and data privacy guidelines with...
Page 24
Web Appli- – Option 2: with WPS function cation. Other connections (e.g. WiFi or Ether- g Refer to the Porsche Home Energy Manager Oper- net) can be maintained at the same time. This – Press the WPS button on the network ating Manual.
Page 25
– or – – Press the pairing button on the PLC one first. You can link the Porsche ID later on. To do To enable the DHCP server, press and hold the modem. this, go to Connections > User profiles. To transfer PLC pairing button on the Home Energy Manager –...
Page 26
It can take up to 2 minutes to complete registration A maximum of 12 current converters can be connec- If in doubt, check in the HEM following registration on the Porsche ted and configured. This enables the monitoring of the marking on the website.
Page 27
EEBus describes a communication protocol that is in- Define the connected current converter for each tegrated in the Porsche Mobile Charger Connect, for phase of the house connection and for other power Example Shows the two configuration example.
Page 28
You can identify the EEBus device by its ID num- network and to the energy manager. ber (SKI). The SKI of the charger Porsche Mobile Charger Connect can be found in Web Applica- Information on adding the energy manager in the...
Page 29
When the plug-and-Charge function is activated, per kilowatt hour. of use, we recommend letting the energy manager Porsche vehicles supplied with an energy manager coordinate the charging processes. The energy dis- can carry out a phase-individual reduction in the Variable tariff...
Page 30
(unless limited by overload When the setup wizard has finished, you will auto- A timer must be set to optimise costs. Porsche Tay- protection). After this, charging is optimised, i.e. the matically be taken to the overview of Web Applica-...
Page 31
EEBus connection on the EEBus device (e.g. Repeat EEBus connection on the EEBus device and, if necessary, boost the device in the overview of the Web Porsche charger) has failed communication signal (WiFi or PLC). Application g Pay attention to the manual of the EEBus device.
Page 32
A fuse that does not protect the energy man- You can purchase current converters for protecting further fuses for cables ager has tripped leading to the EEBus device from your Porsche partner. Have these fitted and configured by a qualified electrician. The vehicle is not charged with...
Page 33
The software version of the Porsche charger Update the Porsche charger. and/or vehicle does not support the function For software updates for your vehicle, contact your Porsche partner. Function self-consumption optimisation inac- Activate function self-consumption optimisation and follow the instruc- tive tions.
Technical Data Technical Data Description Value Ports 2 x USB, 1 x PLC, 2 x WiFi, 2 x Ethernet, 12 x CT input,1 x RS485/CAN (not assigned) Required space Horizontal pitch 11.5 (1 horizontal pitch equals 17.5-18 mm/0.7 inches) Measure current 0.5 A to 600 A (depending on current converter), maximum cable length 3.0 m Voltage measurement 100 V to 240 V (AC)