Bluetooth Telephone Operations - Clarion VRX785BT Owner's Manual & Installation Manual

Bluetooth Telephone Operations

When the connection with your Bluetooth cellular phone is established, the following functions are
available on this unit:
• Listening to your telephone calls on the car speakers.
• Answering to an incoming call.
• Making a call using the Ten-Key pad screen.
• Making a call using the Phone Book data in the selected cellular phone.
• Making a call using the History data of the dialed/received calls.
• Redialing
Note:
• The Bluetooth cellular phones are managed separately from the Bluetooth audio players. However, when you
wish to use the same device as the audio player, register it in the BT Phone mode ahead. If the same device
has been already registered in the Bluetooth mode, it may connect to this unit even when it has not been
registered in the BT Phone mode. In such case, the Phone Book, History, and 10Key functions are disabled.
• Some cellular phones may not be able to transfer the Phone Book data.
• The Phone Book data transmission may take a long time. The operations of sending calls are disabled during
the data transmission.
• You can talk with other party by using the internal microphone. When it is hard to hear for the other party in
accordance with the communication condition or the used telephone, use the optional microphone (RCB-
199), and set the Microphone Select setting to "External" (page 54). The sound will be improved, but noises
may still be heard depending on the communication condition.
Selecting the BT Phone mode
1. Press the [MENU] button to display the Menu
screen.
2. Touch the [BT Phone] key to select the BT
Phone mode.
The Telephone screen is displayed.
• When the connection with a Bluetooth
telephone has been established, the
icon, battery indicator, and signal level
indicator are displayed at the bottom of the
screen.
Telephone settings
Setting the telephone features
1. Touch the [Setting] key to display the
Telephone Settings screen.
2. Perform setting for the desired item.
See the following sections for detail.
3. Touch the [Back] key to return to the previous
screen.
●Setting Automatic Connection
The system automatically reconnects the cellular
phone after the connection is lost or the system
is restarted.
• The factory default setting is "OFF".
2-1. Touch the [ON] or [OFF] key of the
Automatic Connection item to set the
function ON or OFF.
●Setting Automatic Incoming Call
When a call comes in, the system automatically
connects the call approx. 5 seconds after the
calling starts.
• The factory default setting is "OFF".
2-1. Touch the [ON] or [OFF] key of the
Automatic Incoming Call item to set the
function ON or OFF.
53
VRX785BT