Clarion VRX785BT Owner's Manual & Installation Manual page 26

Connecting/Disconnecting an USB Media Device
Connecting an USB media
device
CAUTION
• For your safety, the driver should not
connect or disconnect an USB media
device.
• Do not start the vehicle's engine while the
MTP audio player is connected, since it may
result in loss or damage to data on the MTP
audio player. Connect the MTP audio player
to this unit after starting the engine.
• Do not remove the DCP while the MTP audio
player is connected, since it may result in
loss or damage to data on the MTP audio
player.
1. Turn on the power of your USB media device,
if required.
2. Confirming the orientation of the connectors,
connect the USB media device to the USB
connector of this unit.
• It may take a long time to recognize the
connected device.
After connecting an USB device
The system will automatically be switched to the
relevant source media mode according to the
USB device connected, and start playback.
When an iPod is connected:
The system is switched to the iPod mode. See
"iPod Operations" (page 45).
When an MTP audio player is connected:
The system is switched to the MTP Audio Player
mode. See "MTP Audio Player Operations"
(page 49).
When an USB memory is connected:
The system is switched to the USB Memory
mode. See "USB Memory Operations" (page 50).
Note:
• Never insert foreign objects into the USB
connector.
• Always insert the USB media device fully into the
connector. Incomplete connections may cause the
device not to be recognized.
24
VRX785BT
Disconnecting an USB media
device
1. Confirm that data transfer is not performed on
the USB media device.
For the method to confirm it, see the operation
manual of your USB media device.
2. Remove the USB media device from the USB
connector.
CAUTION
Be sure to disconnect the MTP audio player
while the vehicle's engine is running.
Otherwise, it may result in loss or damage to
data on the MTP audio player. Do not stop the
engine when the MTP audio player is
connected.
Note:
• When turning on the ACC power with no USB
media device connected, "MEDIA CHECK" may
be displayed on the screen if the USB mode is
selected.